Wear Resistant Ceramic Plate manufacturers

This topic has 1 voice, contains 0 replies, and was last updated by Avatar of dsghdfhdf dsghdfhdf 125 days ago ago.

Author Posts
February 22, 2019 at 6:44 am #74014319 You must be logged in to reply
Avatar of dsghdfhdf Rank: Prospect
Points: 345
Posts: 11
Followers: 0
Registered: Feb 2019

Description of the ceramic-wear-plate
ceramic wear plate is a ceramic material with alumina (Al2O3) as the main body and used in thick film integrated circuit. ceramic wear plate has good conductivity, mechanical strength and high temperature resistance. Attention is needed
Use ultrasound for washing. ceramic wear plate is a kind of widely used ceramic, because of its superior performance, the application of modern society has become more and more extensive, to meet the needs of daily use and special performance.
Al2O3 content of high purity alumina ceramics is 92 More than 9% of the ceramic material, due to the sintering temperature up to 1650-1990 ℃, the transmission wavelength of 1 ~ 6 microns, usually made from molten glass to replace platinum crucible;
It is used as the sodium lamp tube with its transmittance and alkali resistance. In the electronics industry, it can be used as integrated circuit board and high frequency insulation material.
Ordinary alumina ceramics are divided into 99 porcelain, 95 porcelain, 90 porcelain and 85 porcelain in accordance with Al2O3 content. Sometimes the content of Al2O3 is in 80% or 75% of the ceramic series. 99 alumina porcelain
The material is used for high temperature crucible, furnace tube and special wear-resisting material such as ceramic bearing, ceramic seal and water valve, etc. Alumina porcelain is mainly used as corrosion resistant and wear-resisting parts; The porcelain is often mixed in Some talc has improved the electrical properties and mechanical strength, which can be sealed with molybdenum, niobium, tantalum, etc., and some are used as vacuum devices.
Details of the ceramic-wear-plate
1.Technicals of the wear resistant alumina ceramic bricks
Technical Indicators Of Ceramic
Alumina content≥92
Compressive Strength≥850Mpa
KIC fracture toughness≥4.8Mpa.M1/2
Bending strength≥290 mp
Thermal conductivity20 w/m.k
Coefficient of thermal expansion7.2*10-6m/*m.k
Photos of the ceramic wear plateWear Resistant Ceramic Plate manufacturers